You can share it to WeChat via the Qr code.
1.
Computational Analysis of a High-Compression Hydraulic Landing Gear System for Enhanced Aircraft Safety
Yujia Wei(School of Aerospace, Transport and Manufacturing, Cranfield University, Cranfield MK43 0AL, UK)
2.
A Tensor Basis Neural Network-Based Turbulence Model for Transonic Axial Compressor Flows
Ziqi Ji (School of Energy and Power Engineering, Beihang University)
3.
Numerical simulation of lithium-ion battery thermal runaway considering active material volume fraction effect by BatteryFOAM
Yan DING (Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Republic of Singapore)
4.
Multiphysical Modelling of Selective Laser Melting Process: Liquid Metal Evaporation Effects
Ce Liu (Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Republic of Singapore)
5.
Compressible Two-Phase Flow Solver: DSRYrhoCentralFOAM
Pikai ZHANG (Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Republic of Singapore)
6.
Soot modeling in hydrocarbon flames with the OpenFOAM
Chenyang Cao (Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Republic of Singapore)
7.
Numerical Investigation in Two-Way Fluid-Structure Interaction: Using Overset Mesh Techniques for Rigid and Flexible Bodies
Tianyang Zhao (School of Engineering, The University of Manchester)
8.
A novel computational model of false lumen thrombosis in type B aortic dissection after thoracic endovascular aortic repair: a multiphasic approach based on the porous media theory
Xiaofan Li (School of Medical Technology, Beijing Institute of Technology)
9.
Numerical Simulation on CO Emission Characteristics of Centrally-Staged Swirler Combustor
Yating Jin (Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China)
10.
A critical comparison of the implementation of granular pressure gradient term in Euler-Euler simulation of gas-solid flows
Yige Liu (Sate Key Laboratory of Mesoscience and Engineering, Institute of Process Engineering)
11.
Experimental Validation of the Dilute Turbidity Current Model Based on Two-phase Flow Theory
Xiaotong Sun (State Key Laboratory of Internet of Things for Smart City and Department of Ocean Science and Technology, University of Macau, Macau, China)
12.
OpenFOAM Simulations and Experimental Study on Topology Optimization of Regenerative Cooling Channel Around Pylon Structure
Tian Gao (National Key Laboratory of Solid Rocket Propulsion, Northwestern Polytechnical University, Xi’an 710072, Shaanxi, China)
13.
Numerical Simulation of Oblique Detonation Waves in Hydrogen–Air Mixture with OpenFOAM
Yuxuan Zhao (School of Aerospace Engineering, Beijing Institute of Technology, Beijing China)
14.
Numerical Study on the Interactions of Breaking wave and Floating Offshore Wind Turbine
Lige Zhao (School of Engineering, Computing and Mathematics, University of Plymouth, Drake Circus, Plymouth, Devon, UK, PL4 8AA)
15.
Large eddy simulation of breakup of a liquid sheet
Ping Zhang (Nanjing University of Aeronautics and Astronautics)
16.
COMBINING FGM AND DEEP RESIDUAL NETWORKS BASED ON THE MULTI-TASK LEARNING METHOD IN THE SIMULATION OF A PILOTED DIFFUSION FLAME
Chang-song HU (College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics)
17.
INVESTIGATION OF NO FORMATION IN A PILOTED DIFFUSION FLAME USING AN EXTENDED FGM MODEL
Yuru Xi (College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics)
18.
AI assisted computational acceleration of supersonic combustion modelling
Yangchen Xu (College of Engineering,Peking University, Beijing, 100871, China)
19.
Simulation study on appropriate placement of 15MW wind turbines for offshore wind farm
Tae Ho Yoon (Korea Institute of Science and Technology Information, Korea)