Workshop Timetable

From Ofwiki

Second OpenFOAM Workshop will be in session from the morning of Thursday, 7th June 2007 until lunchtime on Saturday, 9th June 2007.

Workshop timetable allocates the session time but without detailed presentation timing. Each of the four themes will have its own slot, framed by the Introduction and Open Forum sessions and (if possible) followed by a themed capability talk. On Saturday, there will be a forum on future developments and collaboration plans.

On Thursday and Friday, OpenFOAM training sessions for interested attendees will be held during the lunch break. A social gathering (dinner or drinks) will be informally organised for Thursday and Friday evening.

Thursday, 7th June 2007, Morning Session

• 9.00 - 10.00 Registration and Reunion Coffee
• 10.00 - 10.45 Second OpenFOAM Workshop: Welcome and Introduction, Hrvoje Jasak Slides

• • OpenFOAM Activities in the Past Year
  • Major OpenFOAM Projects
  • Improvements in linear solver technology in OpenFOAM
  • OpenFOAM in Teaching: Tempus and Beyond
• Coupled Simulations and Fluid-Structure Interaction Session, chaired by Hrvoje Jasak and Zeljko Tukovic, University of Zagreb
  • 11.00 - 11.05 Introduction
  • 11.05 - 12.15 Contributed Presentations
    • From Plastic Pipes and Bottles to Bioengineering Applications: Fluid-Structure Interaction Procedures for Flexible Systems by Aleksandar Karac of University College Dublin Abstract Slides
    • FSI in sail design by Rosario Russo of ESTECO s.r.l.Abstract Slides
    • Fluid-Structure Interaction on lightweight structures by Thomas Gallinger of Technical University MunichAbstract Slides
    • Three-dimensional numerical flow simulations of flapping wings at low Reynolds numbers by Frank Bos of Technical University Delft Abstract Slides

Thursday, 7th June 2007, Lunchtime Training

• 12.30 - 13.45 Training Session, 1: Introduction to OpenFOAM Training Slides
  • OpenFOAM Software Structure and Capabilities
  • Running OpenFOAM Tutorials
  • Code and Case Organisation
  • Mesh Conversion, Pre- and Post-Processing
  • Running OpenFOAM in parallel

Thursday, 7th June 2007, Afternoon Session

• Coupled Simulations and Fluid-Structure Interaction Session, Continued
  • 14.30 - 16.30 Contributed Presentations, continued
    • FSI with large structural displacements by Zeljko Tukovic of University of Zagreb Abstract Slides
    • Particle filtration processes in deformable media by Marianne Mataln of ICE Strömungsforschung GmbH Austria Abstract Slides
    • Sail optimization through evolutionary algorithms by Vicente Diaz Casas of Universidade da CoruñaAbstract Slides
    • Fluid-Structure Interaction in Bioengineering by Valentine Kanyanta of University College Dublin Abstract Slides
  • 16.45 - 17.30 Themed Capability Talks by Hrvoje Jasak Capability talk slides
    • Multi-Domain Support in OpenFOAM
    • Surface and Volume Interpolation Tools
    • Coupled multi-domain simulation support: new conjugate heat transfer tools
    • Implementation of a 6-DOF solver by Dubravko Matijasevic, FSB Zagreb Abstract Slides

Friday, 8th June 2007, Morning Session

• Turbomachinery Simulations With OpenFOAM Session, chaired by Maryse Page, Hydro-Québec and Håkan Nilsson of Chalmers University of Technology

• • 9.00 - 9.15 OpenFOAM Turbomachinery Working Group by Maryse Page and Håkan Nilsson Slides
  • 9.15 - 11.30 Contributed Presentations
    • OpenFOAM activities at Chalmers and within the Swedish Water Power Center by Håkan Nilsson of Chalmers University of Technology, Sweden Slides
    • Numerical Calculations of Rotordynamical Coefficients and Forces on a Hydropower Turbine Runner Using OpenFOAM by Martin Karlsson of Luleå University of Technology, Sweden Slides
    • Adapting OpenFOAM for turbomachinery applications, by Maryse Page and Martin Beaudoin of Hydro-Québec, Canada Slides
    • k-omega turbulence model in OpenFOAM: Implementation and Validation by Sung-Eun Kim of Naval Surface Warfare Center, Carderock Division, USA Slides
    • Synthesis of artificial turbulent fields with prescribed second order statistics using the random spot method by Johann Turnow of Universität Rostock, Germany Abstract Slides
    • Automatic Duct Optimisation by Eugene de Villiers of ICON, UK Abstract Paper
    • Use of OpenFOAM in modeling of water on deck and dynamic stability of floating bodies in waves by Eric Paterson of Penn State University Slides
  • 11.45 - 12.15 Themed Capability Talks by Hrvoje Jasak Capability talk slides
    • Implementation of GGI Interfaces and Generalisation to Other Turbomachinery Needs by Hrvoje Jasak
    • Open Forum on Parallelisation of Surface Mesh Techniques

Friday, 8th June 2007, Lunchtime Training

• 12.30 - 13.45 Training Session, 2: Programming in OpenFOAM Training Slides
  • Organise Your Work With OpenFOAM
  • Create Your Own OpenFOAM Executable
  • Code Walk-Through: Solver and Utility
  • Simple Data Manipulation, input/output
  • Five Most Important Classes and Their Interaction
  • Using Advanced Post-Processing: Data Manipulation and On-the-Fly Tools

Friday, 8th June 2007, Afternoon Session

• OpenFOAM for Internal Combustion Engine Simulations, Combustion and Spray Session chaired by Tommaso Lucchini, Politecnico di Milano
  • 14.30 - 14.35 Introduction: Slides
  • 14.35 - 16.45 Contributed Presentations
    • Automatic Mesh Motion with Topological Changes for Engine Simulation by Tommaso Lucchini of Politecnico di Milano (Part of this work was published in the SAE Congress 2007, paper no. 2007-01-0170). Abstract Slides
    • OpenFOAM for LES of premixed combustion and mixing processes by Hannes Kröger, Steffen Jahnke, Nikolai Kornev and Egon Hassel of Universitat Rostock. Abstract Slides
    • 1D-3D coupling for Automobile Powertrain Systems by Gianluca Montenegro of Politecnico di Milano (Part of this work was published in SAE Congress 2007, paper no. 2007-01-0935) Abstract Slides
    • Multiphase Flow Simulations - Sprays, Cavitation and Hoppers by Fabian Peng Karrholm of Chalmers University of Technology, Goteborg Abstract Slides
    • Numerical Simulation of Flashing Flow in Fuel Injector Nozzles Using HRMFoam by David P. Schmidt and S. Gopalakrishnan of University of Massachusetts – Amherst Abstract Slides
  • 17.00 - 17.30 Themed Capability Talks by Tommaso Lucchini, Politecnico di Milano and Hrvoje Jasak Capability talk slides
    • Introduction to Automatic Mesh Motion
    • Introduction to Topological Mesh Changes
  • 17.30 - 18.00 Tutorial: Engine with Piston and Valve Action Simulation in OpenFOAM by Tommaso Lucchini, Politecnico di Milano Tutorial slides

Saturday, 9th June 2007, Morning Session

• 10.00 - 11.30 OpenFOAM Porting and Help for New Users Session chaired by Bernhard Gschneider and Petr Vita, ICE Strömungsforschung GmbH and University of Leoben
  • OpenFOAM on a Mac OS X by Bernhard Gschaider, ICE Strömungsforschung GmbH, Austria Slides
  • Porting OpenFOAM to Windows by Petr Vita, University of Leoben, Austria Slides
  • Public Access Development Repository by Martin Beaudoin, Hydro-Québec, Canada Slides
  • Open Forum: Changes Requred for Easier Porting of OpenFOAM to Windows and Mac OS X
• 11.30 - 12.15 OpenFOAM Future Development Plans, Hrvoje Jasak, Wikki Ltd.

Saturday, 9th June 2007, Lunchtime

• 12.30 - 14.00 Open Discussion Forum: Plans for the Future
  • Experience with establishing OpenFOAM Working Groups by Maryse Page, Hydro-Québec
  • Helping Newcomers to OpenFOAM: Intensive Training Courses Open To All, Hrvoje Jasak, Wikki Ltd., UK
  • How to Contribute to the OpenFOAM Project
  • Announcing Third OpenFOAM Workshop, Politecnico di Milano, Italy
  • Goodbye!!! Slides